Vibration Damper Seal, Replacing: Procedure: Removing

-- Remove the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .

• The : T10531/2  is installed.

  Courtesy of AUDI OF AMERICA, LLC

-- Remove the seal -arrow- with the : T40274  .

-- Clean the contact and sealing surface.

-- Push the seal -arrow- on the : T10354  .

Courtesy of AUDI OF AMERICA, LLC

• The closed side of the seal points to the : T10354  .

-- Push the seal -arrow- with the : T10354  on the : T10531/2  and place on the lower timing chain cover.

Courtesy of AUDI OF AMERICA, LLC

-- Additionally attach the : T10375  and tighten the : T10531/4  .

Courtesy of AUDI OF AMERICA, LLC

-- Drive the seal in all the way using the : T10354  .