Bearing Bracket, Removing And Installing: Installing

-- Install the bolts -arrows- and tighten them. Tightening specifications -item 4-  OVERVIEW - CYLINDER HEAD.

-- Lubricate the hole -arrow- with engine oil.

• Carefully attach the bearing mount, without tilting.

-- Attach the bearing mount and install the bolts -arrows- all the way by hand.

-- Depending on the version, remove either the :T40011  or the :T40267  .

-- Tighten the bolts -arrows-. Refer to OVERVIEW - CAMSHAFT TIMING CHAINS .

Installation is performed in reverse order of removal, noting the following:

-- Install the upper timing chain cover. Refer to UPPER TIMING CHAIN COVER, REMOVING AND INSTALLING .

There are additional procedures depending on the model. Refer to TIMING CHAIN COVER, REMOVING AND INSTALLING .