Overview, Disassembling and Assembling

For more information. Refer to Self Study Program; No. 414; 4MOTION with all wheel clutch generation IV.

Seal
- Always replace
- Coat with High Performance All Wheel Drive Clutch Oil and insert
All Wheel Drive Clutch Housing
- All wheel drive clutch, removing and installing. Refer to ALL WHEEL DRIVE CLUTCH, REMOVING AND INSTALLING .
All Wheel Drive Control Module -J492-
- With the Final Drive Clutch Control Valve -N373-
- Removing and installing. Refer to All Wheel Drive Control Module -J492-, REMOVING AND INSTALLING GENERATION IV .
Bolts
- 6 Nm
Flange/Driveshaft Seal
Replacing. Refer to DRIVESHAFT FLANGE SEAL, REPLACING .
Driveshaft Flange
- Removing and installing. Refer to DRIVESHAFT FLANGE SEAL, REPLACING .
Nut
- 210 Nm
- Secure using Locking Compound: D 000 600 .
Bolts
- 50 Nm
- Quantity: 4
Cover
- For the oil filter housing
- A filter change is not required
Cover
- For the pressure reservoir
  WARNING:
  Never open the cover, danger of injury!
Seal
- Always replace
- Diameter 34 mm
- For All Wheel Drive Clutch Pump -V181-
- Coat with High Performance All Wheel Drive Clutch Oil and insert
- Quantity: 2
All Wheel Drive Clutch Pump -V181-
- Removing and installing. Refer to All Wheel Drive Clutch Pump -V181-, REMOVING AND INSTALLING, GENERATION IV .
Bolts
- 6 Nm