Function, Checking

The all wheel drive clutch test is performed during a road test with the Vehicle Diagnostic Tester.

WARNING:

To prevent possible injury when performing measuring tests or test drives. Refer to SAFETY PRECAUTIONS .

-- Connect the Vehicle Diagnostic Tester to the diagnostic connection -arrow- with the ignition switched off.

Installed location: Front left footwell, next to the operating lever for the hood.

Enter "Guided Fault Finding" :

-- Turn on the ignition.

-- Select the following in this sequence:

-- Identify the vehicle via the Guided Functions .

-- Select 22- AWD electronics .

-- Select the output diagnostic test mode .

-- Start the output diagnostic test mode and follow the instructions on the tester.