LEMON Manuals: Even more car manuals for everyone

Home >> Audi >> 2017 >> Q3 Premium Plus >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) >> (55 Hood, Lids) >> Rear Lid >> Rear Lid, Removing And Installing >> Adjusting Buffer, Removing And Installing >> Removing

Adjusting Buffer, Removing And Installing: Removing

GWWA55-10822

Courtesy of AUDI OF AMERICA, LLC

-- Release the adjusting buffer by pushing and turning left with a 24 mm socket on the hex fitting and remove.

scientia non olet · About LEMON Manuals