Hood Latch, Removing And Installing: Removing
-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2014 .
-- Left: Remove the washer fluid reservoir filler neck. Refer to WINDSHIELD WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .
-- Disconnect the connector -4- from the anti-theft alarm system.
-- Disconnect the connector from the lock carrier.
-- Remove bolts -3-.
-- Disconnect the hook from the cable -left arrow- and remove it with the guide downward from the hood latch -1-.
-- Disconnect the release cable from the release lever -right arrow-.