Rear Final Drive
- Subframe
- Removing and installing. Refer to SUBFRAME .
- Bolt
- 95 Nm
- Bolt
- 55 Nm
- Bolt
- 55 Nm
- Depending on the date of manufacture for the balance weight fastener. Refer to OVERVIEW - FINAL DRIVE 0BC, 0BD
- Heat Shield
- Bolt
- 20 Nm
- Drive Axle
- Removing and installing. Refer to DRIVE AXLE .
- Rear Final Drive
- Versions with balance weight. Refer to OVERVIEW - FINAL DRIVE 0BC, 0BD
- Refer to FINAL DRIVE, REMOVING AND INSTALLING
- Driveshaft
- Removing and installing. Refer to DRIVESHAFT, REMOVING AND INSTALLING .
- Removing and installing on the rear final drive. Refer to DRIVE SHAFT, REMOVING AND INSTALLING FROM REAR FINAL DRIVE .
- Crossmember