Knock Sensor 4 -G199-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the steering gear, refer to Steering .

-- Disconnect the connector -arrow-.

Fig 1: Disconnecting Connector

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2-.

-- Remove the Knock Sensor 4 -G199- and disconnect the connector -1-.

Fig 2: Identifying Bolt

Courtesy of AUDI OF AMERICA, LLC