Knock Sensor 3 -G198-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Ignore item -3-.
-- Remove the A/C compressor, refer to A/C Compressor Regulator ValveN280, Removing and Installing .
-- Remove the connector -2- from the bracket and disconnect it.
-- Remove the bolt -1- and then the Knock Sensor 3 -G198-.