LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (4.0L - Ignition/Glow Plug System - Engine Code(S): CEUC & CRDB) >> 28 Ignition/Glow Plug System >> Ignition System >> Engine Speed Sensor -G28-, REMOVING AND INSTALLING >> Installing

Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Install the ATF cooler, refer to ATF Circuit .

-- Install the right coolant pipe on the transmission, refer to RIGHT COOLANT PIPE ON TRANSMISSION, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals