Valve Stem Seals, Removing And Installing, Cylinder Head Installed: Assembling
WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
-- Make sure all the roller rocker levers lie on the ends of the valve stems correctly and are clipped onto the respective hydraulic adjusting elements.
-- Install the spark plugs, refer to => 411.
-- Install the camshafts, refer to CAMSHAFT, REMOVING AND INSTALLING .