LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (4.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CEUC & CRDB) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Valve Stem Seals, Removing And Installing >> Valve Shaft Seals, Removing And Installing, Cylinder Removed >> Assembling

Valve Shaft Seals, Removing And Installing, Cylinder Removed: Assembling

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Assembly is performed in the reverse order of disassembly, noting the following:

-- Make sure all the roller rocker levers lie on the ends of the valve stems correctly and are clipped onto the respective hydraulic adjusting elements.

-- Install the camshafts, refer to CAMSHAFT, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals