Camshaft Adjustment Valve 1 -N205 - / Exhaust Camshaft Adjustment Valve 1 -N318-, Removing And Installing, Cylinder Bank 1 (Right): Removing
WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Camshaft Adjustment Valve 1 -N205 - / Exhaust Camshaft Adjustment Valve 1 -N318-, Removing And Installing, Cylinder Bank 1 (Right)
-- Remove the engine cover, refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Loosen the clamps -arrows- and remove the air guide pipe.
WARNING:
Fire hazards and risk of damage for a faulty engine cover.
- The engine cover must be always be installed before the hood is closed.
- The engine may neither be started nor driven without an engine cover.
-- Disconnect the connector -1-.
-- Remove the bolt -2- in question and then remove the valve: