Power Take-Off Drive Chain, Removing And Installing: Removing
WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- Transmission removed, refer to Transmission Park Selector Switch F305, Removing and Installing .
-- Remove the lower timing chain cover, refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .
CAUTION:
Risk of destroying due to reversed running direction on a used drive chain.
- Paint arrows to mark the power take-off drive chain running direction so it can be installed again.
-- Press the tensioning rail in the direction of -arrow- and secure it with a Locking PinT40071.
-- Remove the bolt -1- and remove the idler sprocket.
-- Remove the bolts -2, 3 and 4- and the chain tensioner.
-- Remove the power take-off drive chain.