Overview - Timing Mechanism Drive Chain
WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- Guide Rail
- Bolt
- 17 Nm +90°
- Replacing
- Bolt
- Tightening specification -item 5- OVERVIEW - CAMSHAFT TIMING CHAINS => List Item:Bolt.
- Bolts
- Tightening specification -item 13- OVERVIEW - CAMSHAFT TIMING CHAINS => List Item:Bolts.
- Mounting Pin
- Left camshaft timing chain drive sprocket
- Drive Chain Sprocket
- For the left camshaft control chain
- Bolt
- Tightening specification -item 10- OVERVIEW - CAMSHAFT TIMING CHAINS => List Item:Bolt.
- Bearing Plate
- Left camshaft timing chain drive sprocket
- Asymmetrical version
- Drive Chain
- For timing mechanism
- Before removing, mark the direction of rotation with paint
- Removing and installing, refer to TIMING MECHANISM DRIVE CHAIN, REMOVING AND INSTALLING .
- Guide Rail
- Bolt
- 17 Nm +90°
- Replacing
- Thrust Washer
- Asymmetrical version
- Installed position, refer to Figure
- Drive Chain Sprocket
- For the right camshaft timing chain
- Mounting Pin
- For the right camshaft timing chain drive sprocket
- Asymmetrical version
- Installed position, refer to Figure
- Seal
- Replacing
- Chain Tensioner
- Bolt
- 5 Nm +90°
- Replacing
- Crankshaft