LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (3.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CGXB & CTUA) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Cylinder Head, Removing And Installing >> Removing >> Loosen the cylinder head bolts in the sequence -1 to 8-.

Loosen the cylinder head bolts in the sequence -1 to 8-.

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Cylinder Head Bolts Loosening Sequence
GWWA15-0709Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts, remove the cylinder head and place it on a soft surface (foam).

scientia non olet · About LEMON Manuals