LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (3.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CGXB & CTUA) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Cylinder Head Cover, Removing And Installing >> Left Cylinder Head Cover, Removing And Installing >> Removing

Left Cylinder Head Cover, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the ignition coils, refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .

CAUTION:

Risk of violating emissions legislation on USA vehicles.

  • Do not open the hose connection -arrow-.

-- Remove the bolts in the following sequence -12 through 1- and lay the left cylinder head aside with the crankcase ventilation hose -arrow- connected.

Fig 1: Identifying Left Cylinder Head Cover Bolt, Tightening Sequence
GWWA15-10390Courtesy of AUDI OF AMERICA, LLC