Right Camshaft Timing Chain
WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 80 Nm +90°
- Replacing
- Camshaft Chain Sprocket
- For the exhaust camshaft
- Removing and installing, refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Bolt
- 80 Nm +90°
- Replacing
- Camshaft Adjuster
- For the intake camshaft
- Identification "Intake"
- Removing and installing, refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .NOTE:
Depending on the version the camshaft adjuster has three or four notches. The illustration shows a camshaft adjuster with four notches.
- Bolt
- Tightening specification -item 15- in OVERVIEW - TIMING MECHANISM DRIVE CHAIN .
- Mounting Pin
- For the right camshaft timing chain drive sprocket
- Asymmetrical version
- Installed position, refer to Figure
- Drive Chain Sprocket
- For the right camshaft timing chain
- Installed position, refer to Figure
- Right Camshaft Timing Chain
- Mark the running direction with paint for reinstallation
- Remove from the camshafts, refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Removing and installing, refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
- Thrust Washer
- For the right camshaft timing chain drive sprocket
- Asymmetrical version
- Installed position, refer to Figure
- Chain Tensioner
- For the right camshaft timing chain
- Removing and installing, refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Glide
- Bolt
- 9 Nm