Overview - Cover And Cushion, Without Center Storage Compartment

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Overview Of Cover And Cushion, Without Center Storage Compartment

Courtesy of AUDI OF AMERICA, LLC

Seat Frame
Cushion Clip
- For attaching the seat cover to the seat frame
- Replace
- Install at the same location with Upholstery Clip PliersVAG1634.
Cushion Clip
- For attachment of seat cover to seat cushion
- Replace
- Install at the same location with Upholstery Clip PliersVAG1634.
Wire
- Embedded in the foam of the seat cushion
- For attachment of seat cover to seat cushion
Contour Wire
- Inserted in the pocket of the seat cover
- For attachment of seat cover to seat cushion
Seat Cover
- Seat cover and cushion, removing and installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
- Seat cover and cushion, removing and installing. Refer to COVER AND CUSHION, SEPARATING, REAR BENCH SEAT .
- Allocation.
- Make sure there are no folds after installing
Molding
- Sewn into seat cover
- For attaching the seat cover to the seat frame
- Make sure is fits correctly on the seat frame
Seat Cushion
- Seat cover and cushion, removing and installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
- Seat cover and cushion, removing and installing. Refer to COVER AND CUSHION, SEPARATING, REAR BENCH SEAT .
- Allocation.