Cover And Cushion, Removing And Installing, Rear Bench Seat: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Seat Cushion Clips -1-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear bench seat. Refer to REAR BENCH SEAT, REMOVING AND INSTALLING .

-- Version with center storage compartment: Remove the center storage compartment. Refer to CENTER STORAGE COMPARTMENT, REMOVING AND INSTALLING .

-- Equipment levels with seat cushion clips: Remove the seat cushion clips -1- from the seat frame -2-.

-- Cut the upholstery clips -2- all the way around the seat frame with piers.

Fig 2: Identifying Seat Cover -1-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the seat cover -1- and seat cushion from the seat frame.

Version with Center Storage Compartment:

Fig 3: Identifying Clips -2-, Protective Strip -3- And Protective Strip -3-

Courtesy of AUDI OF AMERICA, LLC

-- Cut the upholstery clips -2- all the way around the seat frame with piers.

-- Disengage the protective strip -3- from the seat frame.

-- Remove the seat cover -1- and seat cushion from the seat frame.