LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Seat Upholstery & Covers) >> 74 Seat Upholstery, Covers >> Front Seat Covers And Cushions >> Seat Pan Cover And Cushion, Separating >> Seat Pan Cover And Cushion, Separating, MULTICONTOUR Seat >> Removing

Seat Pan Cover And Cushion, Separating, MULTICONTOUR Seat: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cutting Electric Wires -Arrows- Between Heating Element On Leg Support -4- And Seat Cover
GWWA74-10424Courtesy of AUDI OF AMERICA, LLC

-- Remove seat cover and seat cushion. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING, MULTICONTOUR SEAT .

-- Remove seat cover -1- from the seat cushion -2- and cut upholstery clips -3- using pliers.

-- Cut the electric wires -arrows- between the heating element on the leg support -4- and the seat cover.

NOTE:

The old heating element remains on the seat cushion and a new heating element (component of the seat cover) is bonded over them.

scientia non olet · About LEMON Manuals