Overview - Seat Pan Cover And Cushion, Standard Seat

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Overview Of Seat Pan Cover And Cushion, Standard Seat

Courtesy of AUDI OF AMERICA, LLC

Seat Pan
Seat Cushion
- Seat cover and cushion, removing and installing. Refer to LOWER SEAT FRAME COVER AND CUSHION, REMOVING AND INSTALLING, STANDARD SEAT .
- Seat cover and cushion, removing and installing. Refer to SEAT PAN COVER AND CUSHION, SEPARATING, STANDARD SEAT .
- Allocation.
Cushion Clip
- For attachment of seat cover to seat cushion
- Replace
- Install at the same location with Upholstery Clip PliersVAG1634.
Wire
- Embedded in the foam of the seat cushion
- For attachment of seat cover to seat cushion
Contour Wire
- Inserted in the pocket of the seat cover
- for attachment of seat cover to seat cushion
Molding
- Sewn into seat cover
- For engaging seat cover on seat pan upper frame
- Make sure it fits correctly in the upper seat frame
Seat cover
- Seat cover and cushion, removing and installing. Refer to LOWER SEAT FRAME COVER AND CUSHION, REMOVING AND INSTALLING, STANDARD SEAT .
- Seat cover and cushion, removing and installing. Refer to SEAT PAN COVER AND CUSHION, SEPARATING, STANDARD SEAT .
- Allocation.
- Make sure there are no folds after installing
Molding
- Sewn into seat cover
- For engaging seat cover on seat pan upper frame
- Make sure it fits correctly in the upper seat frame
Tab
- With hooks
- For engaging seat cover on seat pan upper frame
Molding
- Sewn into seat cover
- For engaging seat cover on seat pan upper frame
- Make sure it fits correctly in the upper seat frame