Overview - Seat Heating Element, MULTICONTOUR Seat

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Overview Of Seat Heating Element, Multicontour Seat

Courtesy of AUDI OF AMERICA, LLC

Seat Cushion
- Allocation.
Heating Element
- For leg rest
- Bonded with seat cushion and joined to heating element in the seat cover; if defective, replace seat cover SEAT PAN COVER AND CUSHION, SEPARATING, MULTICONTOUR SEAT
Seat Bolster Cushion
- Allocation.
Driver Seat Bolster Heater -Z31-
- Front passenger side: Front Passenger Seat Bolster Heater -Z33-
- The heating element is glued to the seat bolster cushion
- Removing and installing. Refer to SEAT PAN SEAT BOLSTER CUSHION, REMOVING AND INSTALLING, MULTICONTOUR SEAT .
- Allocation.
Driver Seat Heating Element -Z6-
- Front passenger side: Front Passenger Seat Heating Element -Z8-
- Heating element sewn into seat cover; if faulty, replace the seat cover. Refer to SEAT PAN COVER AND CUSHION, SEPARATING, MULTICONTOUR SEAT .
- Allocation.
Driver Backrest Heating Element -Z7-
- Front passenger side: Front Passenger Backrest Heating Element -Z9-
- Heating element sewn into backrest cover; if faulty, replace backrest cover. Refer to BACKREST COVER AND CUSHION, SEPARATING, MULTICONTOUR SEAT .
- Allocation.
Backrest Cushion
- Allocation.
Wire
Seat Bolster Cushion
- Allocation.