Overview - Backrest Cover And Cushion, Super Sport Seat

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Overview Of Backrest Cover And Cushion, Super Sport Seat

Courtesy of AUDI OF AMERICA, LLC

Molding
- Sewn into backrest cover
- For attaching the backrest cover on the backrest frame
- Make sure it fits correctly inside the backrest frame
Tab
- With hooks
- Sewn into backrest cover
- For attaching the backrest cover on the backrest frame
Backrest cover
- Backrest cover and cushion, removing and installing. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, SUPER SPORT SEAT .
- Backrest cover and cushion, separating and assembling. Refer to BACKREST COVER AND CUSHION, SEPARATING, SUPER SPORT SEAT .
- Allocation.
- Make sure there are no folds after installing
Contour Wire
- Pushed into the pocket of the backrest cover
- For attachment of backrest cover to backrest cushion
Cushion Clip
- For attachment of backrest cover to backrest cushion
- Replace
- Install at the same location with Upholstery Clip PliersVAG1634.
Wire
- Embedded in the foam of the backrest cushion
- For attachment of backrest cover to backrest cushion
Backrest Frame
Backrest Cushion
- Backrest cover and cushion, removing and installing. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, SUPER SPORT SEAT .
- Backrest cover and cushion, separating and assembling. Refer to BACKREST COVER AND CUSHION, SEPARATING, SUPER SPORT SEAT .
- Allocation.