Headrest Cover And Cushion, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Side Locks

Courtesy of AUDI OF AMERICA, LLC

-- Remove the headrest. Refer to HEADREST, REMOVING AND INSTALLING .

-- Open the side openings -arrows- on the cover -1-.

-- Insert the Trim Removal Wedge3409 or a flat-head screwdriver between the openings -1- in direction of -arrow A-.

Fig 2: Opening Side Locks

Courtesy of AUDI OF AMERICA, LLC

-- Tension the lower U-channel -3- in direction of -arrow B-.

-- Remove the upper side of the cover with the flat channel -2- from the U-channel.

-- Open the zipper by inserting the Trim Removal Wedge3409 or a flat-head screwdriver between the zipper and the cover.

Fig 3: Opening Main Lock

Courtesy of AUDI OF AMERICA, LLC

-- Tension the lower U-channel -1- in direction of -arrow A-.

-- Remove the upper side of the cover with the flat channel -2- from the U-channel -1-.

NOTE:

The cover must be completely open to remove the upholstery.

-- Pull off cover and cushion over the headrest support and remove headrest support.

-- Remove cushion -1- out of cover -2-.

Fig 4: Identifying Cover Padding

Courtesy of AUDI OF AMERICA, LLC