LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Seat Upholstery & Covers) >> 74 Seat Upholstery, Covers >> Front Seat Covers And Cushions >> Driver/Front Passenger Seat Heating Element -Z6- / -Z8-, Removing And Installing >> Driver/Front Passenger Seat Heating Element -Z6- / -Z8-, Removing And Installing, Standard Seat (Manual/Power) >> Removing

Driver/Front Passenger Seat Heating Element -Z6- / -Z8-, Removing And Installing, Standard Seat (Manual/Power): Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disconnecting Wire -2- Directly From Old Heating Element -1-
GWWA74-10415Courtesy of AUDI OF AMERICA, LLC

-- Separate the seat cover from the seat cushion. Refer to SEAT PAN COVER AND CUSHION, SEPARATING, STANDARD SEAT .

-- Disconnect the wire -2- directly from the old heating element -1-.

NOTE:

The old heating elements remain on the cushion and will be covered over by the new heating element.