Driver/Front Passenger Seat Heating Element -Z6- / -Z8-, Removing And Installing, Standard Seat (Manual/Power): Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
-- Align the new heating elements on the seat cushion.
-- Remove protective films from the heating elements in succession, taking care not to damage the heating elements.
-- Bond heating elements in the sequence -B, C, D and A- so that they align with the old heating elements and are wrinkle free.
-- Route the connecting wires to the individual heating elements in the base of the gaps.
Install in reverse order of removal.