LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Seat Upholstery & Covers) >> 74 Seat Upholstery, Covers >> Front Seat Covers And Cushions >> Driver/Front Passenger Backrest Heating Element -Z7- / -Z9-, Removing And Installing >> Driver/Front Passenger Backrest Heating Element -Z7- / -Z9-, Removing And Installing, Standard Seat/Sport Seat (Manual/Power) >> Installing

Driver/Front Passenger Backrest Heating Element -Z7- / -Z9-, Removing And Installing, Standard Seat/Sport Seat (Manual/Power): Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

-- Align the new heating element on the backrest cushion.

-- Peel the protective film off the heating element. Be careful not to damage the heating element.

-- Glue the heating element so that they align with the old heating element and free of wrinkles.

Install in reverse order of removal.

scientia non olet · About LEMON Manuals