LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Seat Upholstery & Covers) >> 74 Seat Upholstery, Covers >> Front Seat Covers And Cushions >> Backrest Cover And Cushion, Removing And Installing >> Backrest Cover And Upholstery, Removing And Installing, Standard/Sport Seat >> Removing

Backrest Cover And Upholstery, Removing And Installing, Standard/Sport Seat: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
  • Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Fasten the front seat on the Engine/Transmission Holder - Seat Repair FixtureVAS6136. Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Remove the backrest cover. Refer to BACKREST COVER, REMOVING AND INSTALLING, STANDARD SEAT/SPORT SEAT/SUPER SPORT SEAT and BACKREST COVER, REMOVING AND INSTALLING, MULTICONTOUR SEAT WITH OPTIONAL EQUIPMENT .

-- Remove the headrest. Refer to HEADREST, REMOVING AND INSTALLING .

-- Remove the backrest. Refer to FRONT BACKREST, REMOVING AND INSTALLING, STANDARD SEAT/SPORT SEAT/SUPER SPORT SEAT .

-- Vehicles with rear seat entertainment: Remove the Rear Seat Entertainment mount. Refer to REAR SEAT ENTERTAINMENT MOUNT/BRACKET, REMOVING AND INSTALLING, VERSION 1 and REAR SEAT ENTERTAINMENT MOUNT/BRACKET, REMOVING AND INSTALLING, VERSION 2 .

-- Unclip the backrest cover clips -5- from the backrest frame using the Pry Lever80 - 200.

Fig 1: Detaching Rear Moldings -1 Through 4- From Backrest Frame
GWWA74-10393Courtesy of AUDI OF AMERICA, LLC

-- Detach the rear moldings -1 through 4- from the backrest frame.

-- Vehicles with seat ventilation: Disconnect the connectors from the fan and free up the wiring.

-- Remove the rear contour wire -1- from the backrest frame -2-.

Fig 2: Removing Rear Contour Wire -1- From Backrest Frame -2-
GWWA74-10401Courtesy of AUDI OF AMERICA, LLC

-- Remove the backrest cover with the lower backrest cushion forward from the backrest frame -1- -arrow A-.

Fig 3: Removing Backrest Cover With Lower Backrest Cushion Forward From Backrest Frame -1- -Arrow A-
GWWA74-10414Courtesy of AUDI OF AMERICA, LLC

-- Carefully remove the backrest cushion -3- near the side airbag from the cushion protection -2- -arrow B-.

-- Remove the backrest cover and backrest cushion upward -arrow C- and off the backrest frame while removing the backrest heating wiring harness and seat ventilation.