Attaching Points for the Frame

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Attaching Points For Frame

Courtesy of AUDI OF AMERICA, LLC

-- When installing the sunroof, the frame must be attached at the front right side -arrow- from the first nut -1- with a 12 mm drill and....

-- the rear left side (oblong hole) -arrow- in front of the last screw -1- with a 10 mm drill.

Fig 2: Installing Sunroof Frame Must Be Attached At Front Right Side From First Nut

Courtesy of AUDI OF AMERICA, LLC

-- Starting at the center and working from the front to the rear, tighten the nuts and screws to the tightening specification. Refer to OVERVIEW - SUNROOF, SUNROOF FRAME .