Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear noise insulation, refer to Noise Insulation .

Vehicles with Multitronic 0AW

Fig 1: Identifying Engine Speed Sensor And Connector

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-.

-- Remove the bolt -2- and the Engine Speed Sensor -G28-.

Vehicles with S tronic Transmission 0B5:

Fig 2: Identifying Bolts And ATF Cooler

Courtesy of AUDI OF AMERICA, LLC

-- Remove bolts -arrows- and move the ATF cooler slightly to the side.

-- Disconnect the connector -2-.

Fig 3: Location Engine Speed (RPM) Sensor -G28-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and the Engine Speed Sensor -G28-.