LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (3.0L - Ignition/Glow Plug System - Engine Code: CPNB) >> 28 Ignition/Glow Plug System >> Glow Plug System >> Camshaft Position Sensor -G40-, REMOVING AND INSTALLING >> Installing

Camshaft Position Sensor -G40-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE: Replace the O-ring.
scientia non olet · About LEMON Manuals