Wear pattern B
WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- Traces of wear, if necessary, with material erosion all around the hole on the bearing bracket -arrow-.
-- Adjust the pre-tension on the left flange shaft bearing, refer to PRE-TENSION ON BALL BEARING, ADJUSTING, LEFT FLANGE SHAFT .
-- Replace the bearing bracket, the ball bearing and the circlip, refer to LEFT FLANGE SHAFT BALL BEARING MOUNTING BRACKET, REMOVING AND INSTALLING .