Wear pattern A
WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- Small indentations near the hole on the bearing bracket -arrows-.
- No trace of wear or material erosion.
-- Optimize the pre-tension on the ball bearing for the left flange shaft, refer to PRE-TENSION ON BALL BEARING, OPTIMIZING, LEFT FLANGE SHAFT .