Upper Transverse Link, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Connections -1- & -2- & Upper Transverse Link -3-

Courtesy of AUDI OF AMERICA, LLC

-- Remove subframe. For FWD vehicles, refer to Removing ; for AWD vehicles, refer to Removing .

-- Mark the installed position of the adjusting bolt -2- to the wheel bearing housing.

-- Separate connections -1 and 2-.

-- Remove upper transverse link -3-.