Brake Rotor, Removing And Installing : Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

-- Raise the vehicle.

-- Remove the wheels.

-- Remove the brake caliper. Refer to Removing .

-- Remove the screw -19- from the brake rotor.

Fig 1: Identifying Front Brakes Overview

Courtesy of AUDI OF AMERICA, LLC

NOTE: Pushing on the brake pads lightly with pliers makes it easier to remove the brake caliper from the brake rotor. Be careful not do damage the paint on the brake caliper.

-- Remove the brake rotor.

-- Clean the brake rotor and the wheel hub before installing the brake rotor.