Brake Rotor, Replacing : Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: The four retaining pins for the brake pads on the brake carrier must not be loosened under any circumstances.

-- Raise the vehicle.

-- Remove the wheels.

-- Remove the front brake pads.

Do not let the brake caliper hang from the brake hose. Secure it to the body with suitable cable ties or wire. Do not support the weight with the brake hose.

-- Remove the bolts -3- on the front brake carrier.

Fig 1: Identifying Brake System Components

Courtesy of AUDI OF AMERICA, LLC

CAUTION: Never remove bolts -6 and 9-

-- Remove the front brake carrier.

-- Remove the bolt -arrow- on the brake rotor while holding the brake rotor firmly.

Fig 2: Identifying Brake Disc Secure Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Remove the brake rotor.

NOTE: When removing the brake rotor from the wheel hub, do not tilt the brake rotor.