Front Brake Rotor, Removing And Installing : Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the affected brake caliper. Refer to Removing .
CAUTION:
Danger of causing damage to the ceramic brake rotor.
- Do not drop the brake rotor.
- Do not remove the brake rotor from the hub with a hammer.
- Do not loosen the brake rotor from the hub by prying.
-- Remove the bolt -1- and remove the brake rotor by hand. Do not use any tools.
If the brake rotor is seized, do the following:
-- Install two M8 bolts -arrows- all the way into the threaded holes of the brake rotor.
-- Turn the bolts a 1 /2 turn further from side to side to loosen the brake rotor from the wheel hub.