LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Brake System - Mechanical Components) >> 46 Mechanical Components >> Front Brakes, Ceramic, Pr-1LN/1LW >> Brake Caliper Balance Weight >> Damper, Removing And Installing >> Installing

Damper, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Depending on the model there are two dampers installed in each front brake caliper.

Use new bolts!

-- Clean the brake caliper around the balance weight.

-- Install the damper -2- in the brake caliper -3-.

-- Install the new bolt and tighten -1-. Refer to -item  1-.

-- Replace the existing dust cap.

scientia non olet · About LEMON Manuals