Brake Pedal Position Sensor -G100-, REMOVING AND INSTALLING, HYBRID VEHICLES: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the instrument panel cover on the driver side. Refer to Interior Equipment .
-- Remove the footwell vent. Refer to [For engine(s) CTUA, CEUC, CRDB, CGXB, CPNB] Air Conditioning .
-- Disconnect the connector -1- to the Brake Pedal Position Sensor - G100- -2-.
-- Remove the bolts -arrows- and the Brake Pedal Position Sensor - G100- -2-.