LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Brake System - Mechanical Components) >> 46 Mechanical Components >> Brake Pedal Bracket >> Brake Pedal Position Sensor -G100-, REMOVING AND INSTALLING, HYBRID VEHICLES >> Installing

Brake Pedal Position Sensor -G100-, REMOVING AND INSTALLING, HYBRID VEHICLES: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

-- Insert the Brake Pedal Position Sensor -G100- -2- and tighten the bolts -arrows- to 8 Nm.

-- Connect the connector -1-.

-- Install the footwell vent. Refer to [For engine(s) CTUA, CEUC, CRDB, CGXB, CPNB] Air Conditioning .

-- Install the driver side instrument panel cover. Refer to Interior Equipment .

CAUTION: Ensure that the brakes and brake lamp switch function properly before the first drive.
scientia non olet · About LEMON Manuals