Brake Fluid Reservoir Cap, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the plenum chamber cover. Refer to Body Front .
-- Remove the tower brace -1- at the bolts -2 through 4-.
-- Disconnect the connector from the brake fluid level warning switch.
-- Remove the screw from the cover.
-- Remove the brake fluid reservoir cover from the vehicle.