Brake Fluid Reservoir Cap, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
-- Place the brake fluid reservoir cover over the brake fluid reservoir.
-- Install the screw in the cap and tighten it to 5 Nm.
-- Connect the connector to the brake fluid level warning switch.
-- Install the tower brace -1- with the bolts -2 through 4 -.
-- Install the plenum chamber cover. Refer to Body Front .