Brake Booster Ball Head, Adjusting
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Dimension a = 164.7 mm ± 0.5 mm
Courtesy of AUDI OF AMERICA, LLC
NOTE:
Surface -1- for measuring.
When measuring, ball head must be arranged at a right angle to surface of brake booster.
Measure to end of ball head without gasket installed.
Tightening specification
| Component |
Nm |
| Ball head to brake booster |
30 |