VACUUM PUMP, REMOVING AND INSTALLING (3.0L TDI Engine)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The vacuum pump is installed behind the oil pump.
The oil pump must be removed and installed. Refer to Lubrication .
-- Disconnect the vacuum line from the plenum chamber bulkhead and connect it.
NOTE:
Plenum Chamber Cover, Removing and Installing