Gas-Filled Strut, Disposing: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Follow the safety regulations.
- Separation work should be done by qualified personnel only.
- Insert the pressure spring into a prismatic jaw vise with a Single Hand Angle Grinder VAS 5167 before cutting through.
- When cutting through the spring coils, a sudden impact will occur.
- The gas-filled strut can be disposed of only after the tension of the compression spring has been reduced to zero.
Special tools and workshop equipment required
- Window Cutter VAG 1561A
- Window Cutter - Saw Blade - 83 mm VAG 1561/26
- Single Hand Angle Grinder VAS 5167