LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Exterior Body Panels (Hood, Lids)) >> (55 Hood, Lids) >> Hood >> Release Cable, Removing And Installing >> Routing the Release Cable Inside the Passenger Compartment

Routing the Release Cable Inside the Passenger Compartment

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Release Cable & Grommet
GWWA55-10714Courtesy of AUDI OF AMERICA, LLC

-- Route the release cable -2- along the >>A-pillar<< as shown.

-- Press the grommet -1- onto the >>A-pillar<< from the interior.

scientia non olet · About LEMON Manuals