Engaging the Release Cable in Release Lever

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Release Cable & Hood Release Lever

Courtesy of AUDI OF AMERICA, LLC

-- Install the release cable -2- into the hood release lever -1- in the direction of the -arrow-.

-- Move the release cable -2- upward as shown and clip it into the bracket -1-.

Fig 2: Identifying Release Cable & Bracket

Courtesy of AUDI OF AMERICA, LLC