LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Exterior Body Panels (Hood, Lids)) >> (55 Hood, Lids) >> Hood >> Hood, Adjusting >> Height Adjustment Stop Buffer

Height Adjustment Stop Buffer

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Height Adjustment Stop Buffer
GWWA55-10705Courtesy of AUDI OF AMERICA, LLC
  1. Stop Buffer
    • The stop buffer -1- also works as a strike guard.
  2. Hood
  3. Adjusting Buffer
    NOTE: The adjusting buffers -2- are used to adjust the height of the hood.
    • The adjusting buffer -2- must lightly contact the lock carrier when the hood is closed.
scientia non olet · About LEMON Manuals