LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Exterior Body Panels (Hood, Lids)) >> (55 Hood, Lids) >> Hood >> Gas-Filled Strut, Removing And Installing >> Installing

Gas-Filled Strut, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: After complete removal of the gas-filled strut ensure correct positioning during installation: the gas-filled strut tube must be attached on the hood side.

-- Press gas-filled strut onto ball stud and engage.

scientia non olet · About LEMON Manuals